메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
채승희 (현대모비스) 박수환 (한양대학교) 김재현 (한양대학교) 이지현 (한양대학교) 임명섭 (한양대학교)
저널정보
한국자동차공학회 한국자동차공학회 추계학술대회 및 전시회 2022년 한국자동차공학회 추계학술대회 및 전시회
발행연도
2022.11
수록면
1,633 - 1,637 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
A sizing process is required to analyze the electromagnetic properties according to the major shape parameters in the initial design stage of a permanent magnet synchronous motor (PMSM). However, predicting the performance of PMSM by commonly used 2-D finite element analysis (FEA) is error-prone due to axial leakage flux. Therefore, the axial leakage flux should be considered in the sizing process. The most accurate way to consider the axial leakage flux is to perform 3-D FEA, but it has the disadvantage of being computationally expensive. From this perspective, this paper proposes a deep transfer learning-based surrogate modeling method to reduce the computational cost for calculating 3-D FEA-based motor parameters. Transfer learning is performed using a large amount of 2-D FEA-based and a small amount of 3-D FEA-based motor parameters. Using the proposed process, it is possible to accurately predict the motor characteristics according to the size-related variables that satisfy the required specifications with a small amount of 3D FEA-based motor parameters. The proposed method was verified through 3D FEA and experiments for PMSM designed from this method.

목차

Abstract
1. 서론
2. Sizing process based on deep transfer learning
3. Sizing process based on deep transfer learning
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0